MISSION DRY (MD)
MISSION DRY (MD) is a high-performance and high-quality desiccant developed by Taiheiyo Cement Group and produced under strict quality control at our factory in Thailand.
With its high moisture absorption performance, MD can protect products and cargo from moisture, condensation, and corrosion that can occur inside the container and packaging during transportation and storage.
HIGH MOISTURE ABSORPTION PERFORMANCE
Maximum moisture absorption is more than 250~300% of its own weight. Due to its high moisture absorption capacity, MD absorbs moisture for a very long time.
The chart below: Comparison between MD and silica gel (Conditions: 30°C, 90% relative humidity)
HIGH-PERFORMANCE PACKAGING MATERIAL
The packaging material is made of a functional film with moisture permeability and water blocking, laminated with a robust non-woven fabric. This packaging does not leak absorbed moisture to the outside, is highly resistant to drops and shocks, and does not cause corrosion. In addition, since this packaging can absorb moisture from both sides, there will be no lack of moisture absorption due to misplacement.
APPLICATIONS
MD is most effective in transportation applications, particularly marine transportation, where temperature and humidity change rapidly over long periods, and condensation is likely to occur.
PRODUCT FORM
***100g with hook: Several MD 100g bags can be connected and hung in a container.
ANOTHER DESICCANT: KALAHARI DRY
Kalahari Dry (KD) is manufactured by the Taiheiyo Cement Group in Japan. MD has higher moisture absorption performance, Meanwhile KD is available in various small volume products: 5g, 10g, 20g, 40g, 50g, and 100g.
MAP
TAIHEIYO International (Thailand) Co., Ltd.
Unit 2302, 23rd Floor, Liberty Square, 287 Silom Road, Silom, Bangrak, Bangkok 10500, Thailand
Tel: +66(0)2631-1570-4
Fax: +66(0)2631-1575
Email : infohub@taiheiyo.co.th
CONTACT US
Work for the Earth,
Create the New Value
MakeWebEasy